Resulta que estaba instalando el Motion Builder desde la página de Autodesk, la versión de prueba, quería ver cómo era la fluidez a la hora de hacer animaciones, como tiene kinematicas inversas y buenas herramientas que me habían comentado, nada quería comprobar por mí mismo este programa, en fin, a la hora de instalarlo, cuando está en proceso de instalación, se cierra todo, y me dice que hubo un error en la instalación, seguido de estos detalles que me deja ver:
2012/5/13:23:59:13 black Fenix winleonic === setup started on winleonic by black fénix ===
2012/5/13:23:59:13 black Fenix winleonic launch.
2012/5/13:23:59:16 black Fenix winleonic === setup ended ===
2012/5/13:23:59:14 black Fenix winleonic === setup started on winleonic by black fénix ===
2012/5/13:23:59:14 black Fenix winleonic launch.
2012/5/14:00:00:17 black Fenix winleonic pageopen launchdialog.
2012/5/14:00:42:29 black Fenix winleonic pageopen licensedialog.
2012/5/14:00:43:07 black Fenix winleonic pageopen productinfodialog.
2012/5/14:00:43:40 black Fenix winleonic pageopen productselectiondialog2.
2012/5/14:00:44:01 black Fenix winleonic pageopen fullprogressdialog.
2012/5/14:00:44:02 black Fenix winleonic installing Autodesk Motion Builder 2012 32-bit: transforms=c:\docume~1\leonic\config~1\temp\_ai1bc .tmp\x86\Motion Builder\motion builderopus-standalone, mst adsk_eula_status=#1 adsk_source_rot=c:\Autodesk\autodesk_motion builder_2012_english_win_32bit\ installdir=c:\archivos de programa\Autodesk\Motion Builder 2012 (32-bit)\ filesinusetext= rebot=reallysuppress adsk_setup_exe=1.
2012/5/14:00:44:35 black Fenix winleonic install Autodesk Motion Builder 2012 32-bit failed installátion aborted, result=1601.
2012/5/14:00:45:35 black Fenix winleonic pageopen installcompletedialog.
2012/5/14:00:45:47 black Fenix winleonic === setup ended ===
2012/5/14:00:47:09 black Fenix winleonic === setup started on winleonic by black fénix ===
2012/5/14:00:47:09 black Fenix winleonic launch.
2012/5/14:00:47:10 black Fenix winleonic === setup ended ===
2012/5/14:00:47:38 black Fenix winleonic === setup started on winleonic by black fénix ===
2012/5/14:00:47:38 black Fenix winleonic launch.
2012/5/14:00:47:38 black Fenix winleonic an instance of setup is already running. Only one instance of setup can run at a time.2012/5/14:00:47:40 black Fenix winleonic === setup ended ===
2012/5/14:00:47:47 black Fenix winleonic === setup started on winleonic by black fénix ===
2012/5/14:00:47:47 black Fenix winleonic launch.
2012/5/14:00:47:47 black Fenix winleonic an instance of setup is already running. Only one instance of setup can run at a time.2012/5/14:00:47:56 black Fenix winleonic === setup ended ===
2012/5/14:00:47:09 black Fenix winleonic === setup started on winleonic by black fénix ===
2012/5/14:00:47:09 black Fenix winleonic launch.
2012/5/14:00:48:10 black Fenix winleonic pageopen launchdialog.
2012/5/14:00:49:17 black Fenix winleonic pageopen licensedialog.
2012/5/14:00:49:19 black Fenix winleonic pageopen productinfodialog.
2012/5/14:00:49:34 black Fenix winleonic pageopen productselectiondialog2.
2012/5/14:00:49:53 black Fenix winleonic pageopen fullprogressdialog.
2012/5/14:00:49:53 black Fenix winleonic installing Autodesk Motion Builder 2012 32-bit: transforms=c:\docume~1\leonic\config~1\temp\_ai203 .tmp\x86\Motion Builder\motion builderopus-standalone, mst adsk_eula_status=#1 adsk_source_rot=c:\Autodesk\autodesk_motion builder_2012_english_win_32bit\ installdir=c:\archivos de programa\Autodesk\Motion Builder 2012 (32-bit)\ filesinusetext= rebot=reallysuppress adsk_setup_exe=1.
2012/5/14:00:50:26 black Fenix winleonic install Autodesk Motion Builder 2012 32-bit failed installátion aborted, result=1601.
2012/5/14:00:51:26 black Fenix winleonic pageopen installcompletedialog.
2012/5/14:00:52:27 black Fenix winleonic === setup ended ===
2012/5/14:03:01:16 black Fenix winleonic === setup started on winleonic by black fénix ===
2012/5/14:03:01:16 black Fenix winleonic launch.
2012/5/14:03:01:20 black Fenix winleonic === setup ended ===
2012/5/14:03:01:18 black Fenix winleonic === setup started on winleonic by black fénix ===
2012/5/14:03:01:18 black Fenix winleonic launch.
2012/5/14:03:02:22 black Fenix winleonic pageopen launchdialog.
2012/5/14:03:03:26 black Fenix winleonic pageopen licensedialog.
2012/5/14:03:03:29 black Fenix winleonic pageopen productinfodialog.
2012/5/14:03:03:34 black Fenix winleonic pageopen productselectiondialog2.
2012/5/14:03:03:50 black Fenix winleonic pageopen fullprogressdialog.
2012/5/14:03:03:50 black Fenix winleonic installing Autodesk Motion Builder 2012 32-bit: transforms=c:\docume~1\leonic\config~1\temp\_ai30e .tmp\x86\Motion Builder\motion builderopus-standalone, mst adsk_eula_status=#1 adsk_source_rot=c:\Autodesk\autodesk_motion builder_2012_english_win_32bit\ installdir=c:\archivos de programa\Autodesk\Motion Builder 2012 (32-bit)\ filesinusetext= rebot=reallysuppress adsk_setup_exe=1.
2012/5/14:03:04:23 black Fenix winleonic install Autodesk Motion Builder 2012 32-bit failed installátion aborted, result=1601.
2012/5/14:03:05:23 black Fenix winleonic pageopen installcompletedialog.
2012/5/14:03:05:27 black Fenix winleonic === setup ended ===
2012/5/14:03:15:09 black Fenix winleonic === setup started on winleonic by black fénix ===
2012/5/14:03:15:09 black Fenix winleonic launch.
2012/5/14:03:15:11 black Fenix winleonic === setup ended ===
2012/5/14:03:16:08 black Fenix winleonic === setup started on winleonic by black fénix ===
2012/5/14:03:16:08 black Fenix winleonic launch.
2012/5/14:03:16:08 black Fenix winleonic an instance of setup is already running. Only one instance of setup can run at a time.2012/5/14:03:16:09 black Fenix winleonic === setup ended ===
2012/5/14:03:15:10 black Fenix winleonic === setup started on winleonic by black fénix ===
2012/5/14:03:15:10 black Fenix winleonic launch.
2012/5/14:03:16:11 black Fenix winleonic pageopen launchdialog.
2012/5/14:03:24:12 black Fenix winleonic pageopen licensedialog.
2012/5/14:03:24:36 black Fenix winleonic pageopen productinfodialog.
2012/5/14:03:24:40 black Fenix winleonic pageopen productselectiondialog2.
2012/5/14:03:25:09 black Fenix winleonic pageopen fullprogressdialog.
2012/5/14:03:25:10 black Fenix winleonic installing Autodesk Motion Builder 2012 32-bit: transforms=c:\docume~1\leonic\config~1\temp\_ai32b .tmp\x86\Motion Builder\motion builderopus-standalone, mst adsk_eula_status=#1 adsk_source_rot=c:\Autodesk\autodesk_motion builder_2012_english_win_32bit\ installdir=c:\archivos de programa\Autodesk\Motion Builder 2012 (32-bit)\ filesinusetext= rebot=reallysuppress adsk_setup_exe=1.
2012/5/14:03:25:43 black Fenix winleonic install Autodesk Motion Builder 2012 32-bit failed installátion aborted, result=1601.
2012/5/13:23:59:13 black Fenix winleonic === setup started on winleonic by black fénix ===
2012/5/13:23:59:13 black Fenix winleonic launch.
2012/5/13:23:59:16 black Fenix winleonic === setup ended ===
2012/5/13:23:59:14 black Fenix winleonic === setup started on winleonic by black fénix ===
2012/5/13:23:59:14 black Fenix winleonic launch.
2012/5/14:00:00:17 black Fenix winleonic pageopen launchdialog.
2012/5/14:00:42:29 black Fenix winleonic pageopen licensedialog.
2012/5/14:00:43:07 black Fenix winleonic pageopen productinfodialog.
2012/5/14:00:43:40 black Fenix winleonic pageopen productselectiondialog2.
2012/5/14:00:44:01 black Fenix winleonic pageopen fullprogressdialog.
2012/5/14:00:44:02 black Fenix winleonic installing Autodesk Motion Builder 2012 32-bit: transforms=c:\docume~1\leonic\config~1\temp\_ai1bc .tmp\x86\Motion Builder\motion builderopus-standalone, mst adsk_eula_status=#1 adsk_source_rot=c:\Autodesk\autodesk_motion builder_2012_english_win_32bit\ installdir=c:\archivos de programa\Autodesk\Motion Builder 2012 (32-bit)\ filesinusetext= rebot=reallysuppress adsk_setup_exe=1.
2012/5/14:00:44:35 black Fenix winleonic install Autodesk Motion Builder 2012 32-bit failed installátion aborted, result=1601.
2012/5/14:00:45:35 black Fenix winleonic pageopen installcompletedialog.
2012/5/14:00:45:47 black Fenix winleonic === setup ended ===
2012/5/14:00:47:09 black Fenix winleonic === setup started on winleonic by black fénix ===
2012/5/14:00:47:09 black Fenix winleonic launch.
2012/5/14:00:47:10 black Fenix winleonic === setup ended ===
2012/5/14:00:47:38 black Fenix winleonic === setup started on winleonic by black fénix ===
2012/5/14:00:47:38 black Fenix winleonic launch.
2012/5/14:00:47:38 black Fenix winleonic an instance of setup is already running. Only one instance of setup can run at a time.2012/5/14:00:47:40 black Fenix winleonic === setup ended ===
2012/5/14:00:47:47 black Fenix winleonic === setup started on winleonic by black fénix ===
2012/5/14:00:47:47 black Fenix winleonic launch.
2012/5/14:00:47:47 black Fenix winleonic an instance of setup is already running. Only one instance of setup can run at a time.2012/5/14:00:47:56 black Fenix winleonic === setup ended ===
2012/5/14:00:47:09 black Fenix winleonic === setup started on winleonic by black fénix ===
2012/5/14:00:47:09 black Fenix winleonic launch.
2012/5/14:00:48:10 black Fenix winleonic pageopen launchdialog.
2012/5/14:00:49:17 black Fenix winleonic pageopen licensedialog.
2012/5/14:00:49:19 black Fenix winleonic pageopen productinfodialog.
2012/5/14:00:49:34 black Fenix winleonic pageopen productselectiondialog2.
2012/5/14:00:49:53 black Fenix winleonic pageopen fullprogressdialog.
2012/5/14:00:49:53 black Fenix winleonic installing Autodesk Motion Builder 2012 32-bit: transforms=c:\docume~1\leonic\config~1\temp\_ai203 .tmp\x86\Motion Builder\motion builderopus-standalone, mst adsk_eula_status=#1 adsk_source_rot=c:\Autodesk\autodesk_motion builder_2012_english_win_32bit\ installdir=c:\archivos de programa\Autodesk\Motion Builder 2012 (32-bit)\ filesinusetext= rebot=reallysuppress adsk_setup_exe=1.
2012/5/14:00:50:26 black Fenix winleonic install Autodesk Motion Builder 2012 32-bit failed installátion aborted, result=1601.
2012/5/14:00:51:26 black Fenix winleonic pageopen installcompletedialog.
2012/5/14:00:52:27 black Fenix winleonic === setup ended ===
2012/5/14:03:01:16 black Fenix winleonic === setup started on winleonic by black fénix ===
2012/5/14:03:01:16 black Fenix winleonic launch.
2012/5/14:03:01:20 black Fenix winleonic === setup ended ===
2012/5/14:03:01:18 black Fenix winleonic === setup started on winleonic by black fénix ===
2012/5/14:03:01:18 black Fenix winleonic launch.
2012/5/14:03:02:22 black Fenix winleonic pageopen launchdialog.
2012/5/14:03:03:26 black Fenix winleonic pageopen licensedialog.
2012/5/14:03:03:29 black Fenix winleonic pageopen productinfodialog.
2012/5/14:03:03:34 black Fenix winleonic pageopen productselectiondialog2.
2012/5/14:03:03:50 black Fenix winleonic pageopen fullprogressdialog.
2012/5/14:03:03:50 black Fenix winleonic installing Autodesk Motion Builder 2012 32-bit: transforms=c:\docume~1\leonic\config~1\temp\_ai30e .tmp\x86\Motion Builder\motion builderopus-standalone, mst adsk_eula_status=#1 adsk_source_rot=c:\Autodesk\autodesk_motion builder_2012_english_win_32bit\ installdir=c:\archivos de programa\Autodesk\Motion Builder 2012 (32-bit)\ filesinusetext= rebot=reallysuppress adsk_setup_exe=1.
2012/5/14:03:04:23 black Fenix winleonic install Autodesk Motion Builder 2012 32-bit failed installátion aborted, result=1601.
2012/5/14:03:05:23 black Fenix winleonic pageopen installcompletedialog.
2012/5/14:03:05:27 black Fenix winleonic === setup ended ===
2012/5/14:03:15:09 black Fenix winleonic === setup started on winleonic by black fénix ===
2012/5/14:03:15:09 black Fenix winleonic launch.
2012/5/14:03:15:11 black Fenix winleonic === setup ended ===
2012/5/14:03:16:08 black Fenix winleonic === setup started on winleonic by black fénix ===
2012/5/14:03:16:08 black Fenix winleonic launch.
2012/5/14:03:16:08 black Fenix winleonic an instance of setup is already running. Only one instance of setup can run at a time.2012/5/14:03:16:09 black Fenix winleonic === setup ended ===
2012/5/14:03:15:10 black Fenix winleonic === setup started on winleonic by black fénix ===
2012/5/14:03:15:10 black Fenix winleonic launch.
2012/5/14:03:16:11 black Fenix winleonic pageopen launchdialog.
2012/5/14:03:24:12 black Fenix winleonic pageopen licensedialog.
2012/5/14:03:24:36 black Fenix winleonic pageopen productinfodialog.
2012/5/14:03:24:40 black Fenix winleonic pageopen productselectiondialog2.
2012/5/14:03:25:09 black Fenix winleonic pageopen fullprogressdialog.
2012/5/14:03:25:10 black Fenix winleonic installing Autodesk Motion Builder 2012 32-bit: transforms=c:\docume~1\leonic\config~1\temp\_ai32b .tmp\x86\Motion Builder\motion builderopus-standalone, mst adsk_eula_status=#1 adsk_source_rot=c:\Autodesk\autodesk_motion builder_2012_english_win_32bit\ installdir=c:\archivos de programa\Autodesk\Motion Builder 2012 (32-bit)\ filesinusetext= rebot=reallysuppress adsk_setup_exe=1.
2012/5/14:03:25:43 black Fenix winleonic install Autodesk Motion Builder 2012 32-bit failed installátion aborted, result=1601.
No sé que es lo que estoy haciendo mal, o si es que, acaso mi PC no comple con los requisitos, pero pensé que si corría el 3dsMax 2012 también correria el motion builder2012, en fin, gracias desde ya a todos, bajare de todas formas, el launcher nuevamente para ver si me bajo con errores.